The technology for micro-hole processing is now widely used in the processing fields of parts such as filtration equipment, synthetic fiber spinnerets, jet engine nozzles, computer printer heads, printed circuit boards, star plates for planetariums, components of aviation gyroscopes, aircraft blades, and red blood cell filters in medical devices. The technology for micro-hole processing machine tools requires the cooperation of processing machine tools, and the quality of the machine tools, correct installation methods, and proper operating methods are all closely related. This time, I will share with you the precautions to take when installing micro-hole processing machine tools. The content is as follows:

1. The environmental temperature of the installation site for the micro-hole processing machine tool should be between 10 degrees Celsius and 30 degrees Celsius.

2. In places with stamping equipment and planers, the vibrations and impacts generated during use are not suitable for the installation of machine tools. However, if there is no more suitable place than this, some shockproof measures need to be taken when installing the machine tool in this location.

3. Since the operation panel of the micro-hole processing machine tool is easily corroded, it is best to avoid placing it near heat treatment workshops, electroplating workshops, and similar locations.

4. Additionally, places with a lot of dust and powdery debris are also very detrimental to the maintenance of the machine tool.

5. Check the installation site according to the overall placement diagram, considering whether there is enough space to install the machine tool. At the same time, there should be a certain width of space between machine tools to facilitate operation and maintenance.

6. Check the width and height of the unloading area in front, and plan the transportation route for moving the machine tool in advance to prevent damage to the machine tool during installation.

The precautions for installing the micro-hole processing machine tool have been completed. The aspects represented by these precautions have a significant impact on micro-hole processing, so everyone must take them seriously.